Product Features and Details
Replaced by 66857. http://www.reynaulds.com/products/Trix/66857.aspx
Receiver for all DC locomotives with a current draw up to 1,000 milliamps (motor 1,000 milliamps, lights 300 milliamps). Suitable for digital locomotives with the 14-pin digital connector (mTc14).
- Can be used universally in the Selectrix/SX2 and DCC format.
- Automatic recognition of digital analog operation.
- Maximum speed can be set.
- Motor impulse variants can be set.
- Automatic load compensation.
- Connections for light functions.
- Connections for an auxiliary function.
- Short circuit protection of the motor outputs.
- Overload protection of the light outputs.
- Overload protection of the auxiliary function.
- Programming of additional settings can be done by selecting the address "00", example: finer gradation of the impulse widths (control variants), pole reversal for direction changing.
In Selectrix operation:
- 31 speed levels. (Sx2 127 speed levels).
- 111 addresses. (Sx2 10,000 addresses).
- 1 auxiliary function (Sx2 16 auxiliary functions).
- Block operation with simple diodes (1 or 2 stopping sections).
- Braking operation with braking diode.
In DCC operation:
- Manual speed level selection of 14/28 levels.
- Automatic switchover to 128 speed level.
- Address can be long or short.
- Braking operation with direct current and "broadcast-mode" braking generators.
Dimensions approximately 14 x 9 x 1.8 mm / 1/2" x 3/8" x 1/16".
