Home : Products : Tillig : HO Curved Turnouts : 85374 - left curved inside points
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Follow US


    <<Previous Item Item 11 of 11 Next Item>>

    Tillig left curved inside points  

    Tillig 85374

    Price: $41.25

    System Scale
    DC HO
    Tillig 85374 - left curved inside points

    Product Features and Details
    HO Scale DC 

    Curved Point left 17 ° / 29 °, 9 ° frog angle, branch 17 °, radius 934, branch 29 °, radius 534


    ELITE-curved points

    The curved points are derived from the straight points, i.e. the points angles and tangent lengths are identical for straight and curved points. In original installations, curved points are not produced as standardized forms, but are instead adapted to the individual track situations.


    • To be used for: NEM or RP 25 wheel sets, Older rolling stock with higher wheel flanges up to approximately 1.2mm.
    • The geometry matched to the NEM stipulations regarding possibilities for the use of true-scale long vehicles
    • Rail construction not only for professionals
    • The advantageous properties of the track give the imagination free rein at the planning stage: There is no fixed pattern to unduly restrict your planning intentions.
    • Low rail profile (height of 2.07mm = Code 83)
    • Unusually narrow rail width of just 0.8mm
    • It is supplied ready-weathered (rust brown) like the rail joiners and insulated rail joiners, the rail surfaces are naturally left bright
    • The design of the track corresponds exactly to the “K” - system is suitable for all model railway eras
    • The points blades fixings are reproduced as faithfully as possible: No disturbing joints, acting instead like their originals, The frogs manufactured from very sharply pointed rail

    Customers Who Bought This Item Also Bought

    Noch 36220
    Marklin 88250
    Faller 161773
    Arnold HN6396
    Trix 14951

    Product Reviews

    Tillig 85374 left curved inside points May 16, 2019  Rating: 5
    By Richard
    All my locomotives, including Trix, Micro Metakits, Lematec, Fulgurx, etc run much more smoothly through these turnouts then the PECO that I initially tried. I'm very happy w/ their performance. Items to note: You also have to remove or brush off the surface coating to solder/connect wires. They are delicate and I received one turnout w/ out a tab on the toe switch, which made the toe bar ineffective.
    ©1987-2019 Reynaulds Euro-Imports, Inc. All Rights Reserved.
    Brawa Premium Partner
    McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams