Product Features and Details
Model: The Liliput L132526 E10 electric locomotive is a highly detailed and excellent running locomotive. Liliput did a great job on the paint finish, lettering and detail. The E10 is a iconic German electric locomotive which was used all over Germany. The E10 pulled just about every German passenger car consist so making up a train is very easy. Model is recommended for a minimum radius 360 mm.
Model Features:
- Metal chassis
- 5 pole skew-wound motor with flywheel
- 21 pin DCC receptacle
- Factory installed decoder Motorola/Marklin format
- Functional overhead pantographs
- Switchable to overhead wire
- NEM 362 close coupling shafts
- LED triple headlights alternating with direction of travel
Modellers Tip: As far as train compositions are concerned, this locomotive is a modeler’s dream: In their latter years, it and its sisters were used to pull accelerated trains, so a train consisting of Liliput L334556, L334536, L334537 and L334538 would be a plausible assignment. I would also recommend the Roco cars 44439/44/49/54 and Fleischmann offer a variety of Era III cars of the former DRG which could be used for such trains. Also, express trains with prewar running stock were pulled by this engine. In addition, Roco, Rivarossi, and Piko offer a variety of modern 26.4m cars which all fit behind this engine. Just make sure that they are labeled for Era IV or later. For those with smaller layouts, Fleischmann, Trix and Marklin offer slightly shortened versions (282mm instead of 303mm) of these cars. Also, if you built your layout before the longer cars were available and installed overhead catenary, the longer cars might collide with the masts, while the shorter ones will probably fit. Finally, 4-axle rebuilds of the 4yg class can show up too, either as complete trains or in combination with Silverfish commuters.
Prototype: In 1949, it became clear that the German railroad (Deutsche Bundesbahn) needed a new locomotive for express trains. Continued construction of the successful E 18 class was out of questions since the Swiss railroad BLS had shown that locomotives with four axles in two boogies could provide the same power, but smoother running. First a more powerful version of the E 44 was considered, but this E 46 project was abandoned when it became clear that a speed above 120km/h was needed. The new locomotive class was called the E 10, and five test locomotives were built which differed significantly to allow the testing of several innovations. All of them had a top-speed of 130km/h, and were used on heavy passenger trains. The final design of the E 10 combined the features of all test engines.
The E 10 001, on which the Liliput model is based, was delivered on 23 rd August 1952. Following intensive testing the locomotive entered service on 3 rd January 1953 and was initially housed at Bw Munich Hbf. The locomotive was also on display at the German Transport Exhibition in Munich in 1953. It stayed in Munich until 22 nd February 1955 when it moved to the Bw Nürnberg Hbf, also the place of its withdrawal from service on 26 th June 1975. In its final years it was mainly deployed for local passenger trains, but also goods train traffic. Unfortunately the E 10 001 was broken up at Aw Kassel. The E 10 001 is the basis for the later series locomotives E 10, E 40 and E 41.
